Add to Cart
- Description
- Reviews
- In the box
- Warranty
- FAQ
| ・ Two L-shaped light strips on top and bottom with befitting lighting effects |
| ・ Front and side tempered glass panels with a removable pilar for a seamless view of components and RGB lighting |
| ・ 2 heights adjustable motherboard rear I/O and mounting points |
| ・ Supports up to 420mm radiator on top, and 360mm radiator on side and bottom |
| ・ Supports 140mm fans x3 on top, side, and bottom |
Introducing the all-new O11D EVO RGB, featuring dual ARGB light strips running through the top and bottom of the chassis,creating a stunning look. And the expanded internal space provides greater component compatibility, bringing an exceptional PC-building experience.
Introducing the all-new O11D EVO RGB, featuring dual ARGB light strips running through the top and bottom of the chassis,creating a stunning look. And the expanded internal space provides greater component compatibility, bringing an exceptional PC-building experience.
- Reversible Chassis
- Dual ARGB Strips
- Removable Front Pillar
- Supports Top 420mm Radiator
- Supports 10 Fans
- Adjustable Motherboard Installation
- 8 Drives Capacity
- Cable Management Friendly
Derived from the O11D EVO, the O11D EVO RGB can be displayed in two modes with just a few simple steps, allowing for a left or right view. It also comes in two color options: Black and White.
- Brushed Aluminum
- Black Coated Mesh Panel
- Tinted Tempered Glass
- White Coated Mesh Panel
- Clear Tempered Glass
- Aluminium with white powder coating
ARGB STRIPS ON THE TOP AND BOTTOM
The O11D EVO RGB features a 1.5mm thick L-shaped ARGB strip at both the top and bottom of the chassis that can switch between 14 different lighting effects, adjust brightness and colour, and sync with the motherboard.
M: Next/Previous Light Mode Button: Press 3 seconds to sync MB, press 3 seconds again to cancel. Go back and forth between lighting effects without needing to circle around the loop.
C: Light Colour Button: Switch between 11 colors, press 3 seconds to activate Pure Colour Mode,press 3 seconds again to cancel.
B: Light Brightness Button: Switch between 5 brightness levels-100%, 75%, 50%, 25%,0%.
The O11D EVO RGB’s front pillar can now be easily removed, providing a seamless view for showcasing hardware without affecting the case’s structure.
Compared to the O11D EVO, the O11D EVO RGB is slightly larger, which provides higher component compatibility: it supports a 420mm radiator at the top (requires a separate bracket, 360mm radiator at the side/bottom, and 3x140mm fans at all three sides.
Fan/Radiator Support
TOP
Radiator:420/360mm
Fan:3×120mm/3×140mm
REAR
Fan:1×120mm
SIDE
Radiator:360/280mm
Fan:3×120mm/3×140mm
BOTTOM
Radiator:360mm
Fan:3×120mm/3×140mm
Modularity has always been one of the design languages of the O11D EVO series, and the O11D EVO RGB is no exception.
At the bottom of the chassis, the I/O module with a wealth of ports, can be relocated to 3 different locations without the use of any tools.
Equipped with a quick-release design, the fan brackets of all three sides can be easily removed or installed.
The side bracket can be flipped vertically or horizontally, offering 4 different installation styles.
TOWARD THE MAIN CHAMBER
Supports up to 83.2 mm thick radiator/ fan combo in the main chamber.
TOWARD THE SECOND CHAMBER
Supports up to 113.7 mm thick radiator/ fan combo in the main chamber.
TOWARD THE MOTHERBOARD (LEFT SIDE)
TOWARD THE FRONT PANEL (RIGHT SIDE)
The distance between the left-sided and right-sided installation positions reaches 20mm, so users who use EATX motherboards can choose the right-sided installation to avoid the fans from being blocked by the motherboard while gaining more cable management space. Additionally, the O11D EVO RGB features a newly designed vertical corner grommet, making cable management friendlier even when using a large motherboard.
NOTE: Unlike the O11D EVO, the O11D EVO RGB’s top fan bracket now supports direct radiator installation without disassembly, making it more convenient to use.
The O11D EVO RGB features two sets of pilot holes at different heights, allowing the users to adjust the installation position of the motherboard to accommodate different builds.
Upper Mode
1
Top-83.5mm, supports 3 x 120mm/3 x 140mm fans, 360mm/280mm radiator
Top-63.1mm, supports 420mm radiator
2
Bottom-30mm (below the expansion slots), supports 3 x 140mm fans
Bottom-92.3mm (below a 4-slot thick GPU), supports 3 x 120mm/ 3 x 140mm fans, 360mm/280mm radiator
Lower Mode
1
Top-103.8mm, supports 3 x 120mm/3 x 140mm fans, 360mm/280mm radiator
Top-83.4mm, supports 420mm radiator
2
Bottom-30mm (below the expansion slots), supports 3 x 140mm fans
Bottom-72mm (below a 4-slot thick GPU), supports 120mm/140mm fans, 360mm/280mm radiator
O11D EVO RGB features an improved cable management design, featuring large VELCRO straps near the PSU chamber, dual-layer cable clips that can hold both the bulky and thinner cables, and 15mm of extended space from the rear of the PSU chamber for more cable management room.
The PSU mounting bracket protrudes 15mm from the rear of the case, allowing extra space for cable management. Additionally, a cable tie point along the rear of the case helps with the management of rear I/O cables.
O11D EVO RGB comes with the new anti-sag bracket GB-003 with easy height adjustment to support heavy GPUs.
VG4-4-V2X/VG4-4-V2W
Supports up to 4 slots GPU at vertical mounting position to show off in most of LIAN LI cases. Includes a PCIe 4.0 riser cable for seamless connectivity.
All product packaging prioritizes the safety of the goods. If any damage occurs during transportation, it will be the responsibility of the store or third-party sellers.
All products come with a warranty service specified by the manufacturer in Australia (some products have international warranties; the specifics are determined by the manufacturer).
Can I modify my order?
You can make modifications before the order is shipped. Open the "Order Details" page and click on the "Modify Order" button in the top right corner. If there is no "Modify Order" button, the order cannot be modified.
How long does it take for out-of-stock items to be available?
You can find out the availability time of a product through the following methods: If the product page displays "out of stock," the specific arrival time of the product cannot be determined. You can use the "Arrival Notification" feature on the product page to receive a reminder when the item is in stock. You can also contact our online customer service to confirm the arrival time.
How do I cancel an order?
If the order is in an unshipped status, go to the "My Orders" page, find the order you want to cancel, and click the "Cancel Order" button.
Can I get an invoice?
All products sold on this website are genuine and come with a formal GST invoice. Invoice can be downloaded in the "My Orders" page.
How do I contact the seller?
On the product page, you can find the seller's information on the right side. Click the "Online Customer Service" button to chat with our customer service staff.
What if I receive fewer or incorrect items?
If you purchase multiple items in the same order, they may be sent in more than one package and may not be delivered simultaneously. We recommend that you wait patiently for 1-2 days. If you still haven't received the items, you can directly contact our online customer service for self-operated products or consult the third-party seller through the online customer service.
How long does it take for returns, exchanges, or repairs?
In general, if quality issues arise within 7 days of receipt, you can apply for a return or exchange. Warranties are RTB Warranty, meaning customers must return the faulty product to our workshop; we do not currently offer on-site warranty services. We will cover the shipping costs for eligible warranty returns or exchanges. If the product does not have after-sales issues or does not meet after-sales conditions, the customer will bear any inspection fees. If a technician is required to pick up the item and return it after completing after-sales service or repairs, we will charge a pick-up and delivery fee (Melbourne City and southeast suburbs: $30, north suburbs: $40).
Positive